EMC Testing UK
EMC Testing UK offers a range of EMC
compliance testing services at very competitive prices all of which are carried
out by qualified and highly experienced engineers in our state of
the art EMC testing laboratory based in the North East.
Whether you run a small business manufacturing guitar amplifiers or
run a large organisation producing switched mode power supplies,
today all products must adhere to the relevant EMC standards.
Today the pressure to introduce new products into the UK cheaper and
faster while at the same time maintaining high quality has never
been greater.
Additionally, complying with the electromagnetic compatibly EMC
requirements to sell onto the global markets also creates new
challenges because all non-compatible products are at a risk of
being recalled or even stopped at customs which can have a huge
impact on a business's brand image and reputation.
EMC Testing UK offers one of the most comprehensive ranges of
high quality EMC Compliance Testing Services covering all aspects of
electromagnetic compatibility including:
- Conducted Emissions Testing
- Susceptibility Testing
- Radiated Emissions Testing
- Insulated Testing
- Mains Dropout Testing
- Radiated Immunity Testing
- Flicker Testing
- Insulation Testing
- Harmonics Testing
- Surge Testing
- General Measured Parameters,
Harmonic Distortion etc
- Conducted Immunity Testing
Many of our customers like to evaluate EMC requirements during the
development and prior to the item being sent to an EMC UK testing
establishment.
This helps to reduce the likelihood of having to redesign the
product to meet CE safety and EMC requirements.
This is also a very cost effective way to obtain a look and see
evaluation of the products EMC performance and provide assurance
that any minor modifications required do not affect its compliance.
Quick & Easy Cost Effective EMC Compliance Testing
When you engage EMC Testing UK we will
run a number of EMC compliance Tests on your product and provide you with a
test report containing our conclusions and any recommendations.
Unlike many testing companies if there is a problem with your
product we don't just send it back to you, because we will do our
very best to find you a solution to improve its performance. We know
only too well the problems that may arise during a products
development because we are product designers ourselves.
Our system is quick and easy to use and will provide you with a cost
effective way of obtaining an idea of EMC performance at a low cost,
so please don't fall into the trap of paying thousands of pounds and
waiting a long time for your test report only to be informed there
is a problem with your design, just give us a call so we can help.
Company
Video
Areas CoveredEMC compliance testing and everything else we offer are available to the following locations and the rest of the UK: |
Opening Hours
Key Personnel
Reviews
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
My experience reflects what others have already said. EMC Testing (KBO Dynamics) were extremely accomodating. Straight talking, helpful and knowledgeable. Andy was there to guide us through each step and make suggestions where needed. I wouldn't hesitate to recommend or work with them again.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Extremely helpful company. Always happy to answer questions (without loads of jargon) and provide advice to support the CE marking process in terms of EMC Testing, for our Linear Vibrator Unit. I would definitely recommend working with Andy and his team if you need a quick, friendly and professional service to support you in compiling documentation for your technical file.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Great service at a very good price and very helpful. AT DLG Electronics we were new to EMC testing, this being our first product (a photographic process timer) that required it, and we approached the whole daunting subject with some apprehension. However Andy at EMC Testing UK made it very straightforward, with an immediate response to our enquiry about the testing required for EU and US (FCC Part 15) compliance and a very reasonable quote.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Excellent service and turn around times
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Great, friendly service; extensive & professional test reports
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Great service! We have used them for a couple of projects and the experience has been great. No confusing baffle talk just straight forward and to the point. Very helpful in relation to suggesting the best/most cost effective way forward. If there is an issue with test results they are usually able to make suggestions/solutions. They are extremely knowledge and great to deal with. Will use them whenever I have an EMC issue going forward.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
KBO Dynamics have been testing our products for over two years, head and shoulders above the rest. Andy, is extremely knowledgeable and very honest, top company. Very reasonable regarding cost too.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Great service from Andy. They did EMC testing for us on 3 units, 2 of which have failed for the first time. They designed appropriate filtering for us and re-tested the 2 units, that passed the second time around with great results (the emission results were nowhere near the permitted limits). We received excellent support throughout the whole process, can highly recommend.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
Andy has been most helpful in guiding us through the testing process as well as solving our blunders with shipping. The report has been prompt and delivered everything that was agreed upon. I would certainly recommend EMC testing UK for anyone looking for affordable EMC testing during product development.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
EMC Testing and Certification was carried out on our new Multimote communications board which passed first time. I found working with this company so easy and they fully understood our needs. Would fully recommend KBO Dynamics to anybody looking for approval work for electronic equipment, plus another reason was that they were local to me.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
We found EMCTestingUK to be highly professional in their service. Andy, Colin and the team couldn’t have been more friendly and helpful, including with technical advice. Their service was prompt and the report ultimately provided was clear and well-structured. I have no hesitation in recommending them to anyone who needs EMC Testing to be carried out.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
I am very happy to have worked with EMC Testing UK they were extremely knowledgeable and very helpful whenever I called for advice. I would not hesitate to use them again and would certainly recommend them to others.
EMC Testing UK
01207 238777
Unit 3, Hare Law Industrial Estate Stanley County Durham
DH9 8UJ 5
We found that the service, advice and facilities offered by EMC Testing UK surpassed our expectations at every stage. Nothing was too much trouble for them and we found that it was well worth travelling to the other side of the country for their excellent service.
Products and Services
Our News & PR
-
EN 61000-4-3 Radio Frequency, (RF) Electromagnetic Field Immunity
EN 61000-4-3 Electromagnetic Field Immunity is the standard is part of a set of basic EMC standards that outline test procedures that must be successfully accomplished before products can be sold.
Details -
EMC (EMI) Electromagnetic Interference Testing
EMI (electromagnetic interference) is the disruption of operation of an electronic device when it is in the vicinity of an electromagnetic field in the radio frequency spectrum.
Details -
