Home > m+p International UK Ltd > NVH Testing in a Vehicle

NVH Testing in a Vehicle

m+p International UK Ltd News and PR from m+p International UK Ltd - Published 09 August 2019 Recording structural vibrations and sound pressure of a motorhome to analyze its vibrational behaviour on different road surfaces.
Interior noise perceived in the passenger cabin is one of the most important factors in a customerÂ’s determination of the total quality of the vehicle and largely influences his buying decision. In a recent measurement program, engineers from m+p international studied the NVH behaviour of a motorhome.

Structural vibrations and sound pressure were recorded to analyze the vibrational behaviour on different road surfaces. All measurement data was recorded using our new m+p VibMobile measurement front-end. With its optional battery power, compact form factor, robust design, embedded CPU and storage media, it is tailored for portable or standalone operation. The silent, temperature-controlled fans make the front-end ideally suited for acoustic measurements.

Functions include TEDS support for fast and secure setup, IEPE sensor conditioning switchable for every input channel, cable break and overload detection. To correlate the recorded signal with the driving situation, for example engine speed, the CANbus interface of the m+p VibMobile is used to read the data from the motorhomeÂ’s CANbus.

Online processing of the data measured in the motorhome was performed using the m+p Analyzer. This noise and vibration analysis software allows the operator to visualize and check time data, octave spectra, FFT-based spectra, RPM and much more online during the test run. The raw data and results are stored on a removable disk for later post-processing.
Take your mobile multi-channel measurements, do online analysis, review the results, store raw data and results, share the results with colleagues and continue your work in the lab or office using the acquired data.

Other announcements from m+p International UK Ltd