Home > Billington Safety Systems Ltd > Single and Double Skin Partitioning Project in Newcastle

Single and Double Skin Partitioning Project in Newcastle

Billington Safety Systems Ltd News and PR from Billington Safety Systems Ltd - Published 20 March 2023 The project was to install a storage area for the customer sample products where they stored and picked from for shipping out to customers...
The outer area is our single skin sheet steel 3.05m high in the standard graphite grey, the inner walls where supplied to cover up an older office area which was showing signs of age the double skin is shown with the plastic film on it as this is how it is delivered this is removed before the installers leave site. Finished in graphite grey the outer walls could have been supplied in mesh and expended metal but this customer wanted to enclose the sample area so that people cant see the production and other areas. Doors supplied was 1 large double door and 1 single access door both with lock and key for now but again the customer will installed there own access control at a later stage. The double skin partitioning was also installed on the one outer wall which covered up and older wall which had 2 vending machines against it, our installers drilled holes for electrical cables and also a water pipe to allow these to be easily installed back into position.

Installation on this took 3 days to do.

Partitioning comes in standard colours, Graphite grey, light grey, White, Sandstone, other colours are available on request at extra cost.
Visit website More info >
Installation on this took 3 days to do

Other announcements from Billington Safety Systems Ltd